(N+) SUPER N+ 1L

Description

Plant Mechanics Super N+ 1L

Plant Mechanics Super N+ 1L is a liquid nitrogen supplement with calcium and magnesium for vegetative growth. The manufacturer’s formulation combines three forms of nitrogen and is suitable for soil, coco and hydroponic programs. This listing is the 1 litre bottle.

What the supplement is for

Super N+ is part of the Plant Mechanics performance-additive range. It supplies additional nitrogen and calcium-magnesium alongside a base nutrient program. Choose it for the intended vegetative feeding or repair application, using the appropriate manufacturer’s rate. It is an additive rather than a replacement for a complete base nutrient.

The three nitrogen forms shown in the product analysis are ammonium, nitrate and amide nitrogen. The total nitrogen value is 12.5%; the individual figures add to that total. Calcium and magnesium are listed separately. These are formulation percentages, not the concentration of a ready-to-use nutrient solution.

Plant Mechanics Super N+ 1L application rates

Dilute Super N+ into the reservoir. Select the application rate first, then calculate the amount from the volume of water being prepared. A repair rate and a routine vegetative rate are different options; do not add both amounts to the same mixture.

Mixing examples

For another reservoir size, multiply water volume in litres by the chosen mL/L rate. For example, 30 litres at the vegetative rate needs 30 × 0.5 = 15 mL. Measure that amount with suitable graduated equipment and dilute it into the water rather than estimating a bottle-cap measure.

How far does a 1 litre bottle go?

The bottle contains 1000 mL. At 0.5 mL/L, that is enough product to prepare 2000 litres of solution. At 0.3 mL/L, the calculated volume is approximately 3333 litres; at 0.6 mL/L, approximately 1667 litres. These figures describe dilution capacity at a constant rate, not how long a bottle will last in a particular garden.

To plan a purchase, record the amount of water you normally mix and how often you prepare it. Compare bottles using the same application rate. A larger or smaller dose changes the total volume that can be prepared from Plant Mechanics Super N+ 1L.

Reading the COCO+ schedule

The published Plant Mechanics COCO+ guide lists Super N+ separately from the COCO+ base nutrient. Its first grow week uses 0.3 mL/L and the following grow weeks use 0.5 mL/L. The same chart also includes 0.5 mL/L in the first two bloom weeks before omitting it later in the schedule. That is a specific program, rather than an instruction to use Super N+ at every stage.

For a partly filled reservoir, use the actual water volume. A 100 litre container holding 40 litres of water needs 20 mL at the 0.5 mL/L rate, not the 50 mL needed for a full 100 litres.

Product analysis

Using it within a feeding program

Keep a note of the base nutrient, Super N+ rate and water volume used for each mix. This makes the preparation repeatable and helps you compare changes in the program. When several additives are used, measure each product according to its own directions rather than applying one product’s rate to the whole range.

For help comparing Plant Mechanics Super N+ 1L with other hydroponic additives, contact Hunter Hydro. The official Super N+ information and Plant Mechanics COCO+ feed guide provide application context for the range.