1.2M X 0.6M X 1.2M SEA HAWK CLONE TENT

Description

Sea Hawk Clone Tent 1.2×0.6×1.2m

The Sea Hawk Clone Tent 1.2×0.6×1.2m provides a dedicated propagation enclosure with two coated-wire shelves. Its listed size is 1.2 × 0.6 × 1.2m, with reflective lining and a breathing-panel inlet. The racked arrangement provides two levels for organising propagation equipment within a compact floor footprint.

Sea Hawk Clone Tent 1.2×0.6×1.2m specifications

Planning two propagation levels

The two shelves allow equipment to be organised vertically rather than spread across a single level. Plan the trays, domes and lighting for each shelf before filling the enclosure. Shelf count alone does not establish how many trays will fit: tray length, width and dome height all matter.

The floor footprint is calculated as 1.2 × 0.6 = 0.72 square metres. Adding a second rack level does not increase that external footprint. It changes how the space is arranged inside the tent, while the frame and equipment still occupy part of the available area.

Check trays and dome clearance

Compare the dimensions of your propagation trays with the usable shelf space and the route through the access opening. Include the handles or raised edges of a tray when planning access. A tray that fits on paper may still be awkward to remove if adjacent equipment blocks the opening.

Allow room above each tray for its dome, plants and light. The listed 1.2m overall height is shared by the racked arrangement; it is not the clear growing height above each shelf. Review the layout using the equipment you intend to install.

Lighting each shelf

Plan how light will reach both propagation levels in the Sea Hawk Clone Tent 1.2×0.6×1.2m. Do not assume one overhead fixture provides the same conditions to both shelves. Position the chosen propagation lights using their own mounting instructions and keep them accessible for adjustment.

Route leads so that removing a tray does not pull on a light or its connections. Keep enough space to inspect the plants and equipment on both levels. Reassess the arrangement as the seedlings or cuttings develop and their height changes.

Air movement and the breathing panel

The breathing-panel inlet is part of the enclosure’s air-entry arrangement. Keep it clear of trays, folded fabric and nearby objects. Plan how air will move through the space alongside the lighting and any other equipment you choose to use.

An enclosure and a propagation dome perform different jobs. Consider the conditions inside the dome as well as those in the surrounding tent. Place any monitoring equipment where it can be read without disturbing the trays or pulling their cables.

Watering and routine access

Set out a practical route for filling trays, handling runoff and removing plants. Keep electrical connections away from the areas used for watering. Arrange the shelves and equipment according to the supplied instructions, and check the permitted loading before adding heavy items.

Keep each tray stable and accessible. The coated-wire shelves provide the racked structure; the tent’s fabric should not be used as an improvised shelf or hanging point. Check the closures and access route after arranging the equipment.

Choosing the Sea Hawk Clone Tent 1.2×0.6×1.2m

Choose this model for a compact, racked propagation arrangement and compare its 1.2m overall height with your intended trays and lighting. If you need a taller space for another growing stage, compare the dimensions and layout of the other tents rather than relying only on floor area.

Browse our grow tents, contact Hunter Hydro with your tray and equipment details, or consult the official supplier’s clone-tent information.