Lucius Flex Full Spectrum LED 645W

Description

Lucius Flex Full Spectrum LED 645W

Lucius Flex Full Spectrum LED 645W is a 645W full-spectrum horticultural LED for indoor vegetative and flowering lighting. The product’s stated growing areas are 2 × 2m for vegetative growth and 1.5 × 1.5m for flowering.

Lucius Flex Full Spectrum LED 645W specifications

Full-spectrum lighting

The Lucius Flex provides broad-spectrum light for indoor plants. Its stated coverage differs between vegetative and flowering use because the intended growing stage matters when planning a lighting arrangement. Treat those areas as planning specifications, alongside your canopy layout and the supplied mounting guidance.

Compare output and coverage

A light-output rating does not describe the intensity at every point on a canopy. Compare an installed fixture using suitable canopy measurements. Hanging position, crop height and the layout of the space influence how the light reaches the plants. Review the complete setup when comparing lights.

Planning a Flex installation

Measure the growing area and check that the fixture can be mounted securely with access around it. Plan cable routing and the position of any control equipment before hanging the light. Follow the instructions for the exact Flex model supplied, and confirm accessory compatibility before connecting another controller or driver.

Help choosing a fixture

If you are moving from a smaller light, consider how much canopy you intend to illuminate through the whole crop cycle. Tell Hunter Hydro the growing area and the lighting you already use so we can discuss the available options.

Choosing your Lucius Flex Full Spectrum LED 645W

Check the model name and the specifications above before ordering. Match the fixture to the space available, the stage of growth and the equipment you already use. If you need help comparing the Lucius Flex Full Spectrum LED 645W, send Hunter Hydro the details of your growing area and current lighting.

Review the supplied installation instructions before mounting the light. Calculate delivery by entering your suburb and postcode in the cart, then review the order total before checkout.

Browse our LED grow lights, contact Hunter Hydro or consult the manufacturer or distributor information for this range.

Reading the stated growing areas

The listed vegetative area of 2 × 2m is 4 square metres. The listed flowering area of 1.5 × 1.5m is 2.25 square metres. The two figures refer to different growth stages; they are not alternative measurements of the same floor space. In particular, 1.5 × 1.5m does not mean 1.5 square metres.

Plan the flowering footprint as well as the initial vegetative arrangement if the plants will stay in the same room. Coverage figures describe an intended use area, not a guarantee of identical intensity at every point. Crop height, mounting position and the surrounding surfaces affect the installed result.

Rated-power energy use

The 645W rating corresponds to 0.645 kilowatts. At rated input, a 12-hour day uses 7.74 kWh per fixture; an 18-hour day uses 11.61 kWh. Multiply the relevant daily figure by your electricity tariff to estimate lighting cost. This calculation excludes fans, irrigation and other equipment, and it is not a measurement of a dimmed fixture.

Preparing a model-specific question

When asking about a controller or replacement component, include a clear photo of the Flex model label and the relevant connection. The fixture name and wattage help identify the light, but a connector or component should be matched to the supplied version. This avoids ordering on the assumption that every Lucius fixture uses the same accessory.