PRO GROW LED 200W UFO

Description

Pro Grow LED 200W UFO

Pro Grow LED 200W UFO is a compact 200W horticultural LED with a 4000K full-spectrum output, Samsung and Osram SMD diodes and an Optimum driver. Its aluminium housing provides passive cooling without a built-in fan.

Pro Grow LED 200W UFO specifications

Compact full-spectrum lighting

The UFO places its LED array in a round fixture. The listed 4000K output combines light across several wavelengths for horticultural use. Compare the intended lighting position and growing area with the fixture’s output before choosing between the 200W model and other wattages.

Passive cooling

The aluminium housing transfers heat away from the LEDs without a built-in cooling fan. The growing space still needs suitable air movement and ventilation. Leave room around the equipment and maintain access for inspecting the fixture and its connections.

Understanding the output

The listed photon output is 500 µmol/s for this 200W model. That figure describes emitted photosynthetic light, while the intensity reaching the canopy depends on hanging height and layout. Compare output, electrical input and your plants’ requirements together.

Planning the installation

Check the mounting arrangement and route the lead so it is supported without strain. Use the supplied instructions for the exact unit and confirm any controller or accessory requirements. If you already own another UFO model, compare the labels instead of assuming its control equipment is interchangeable.

Choosing your Pro Grow LED 200W UFO

Check the model name and the specifications above before ordering. Match the fixture to the space available, the stage of growth and the equipment you already use. If you need help comparing the Pro Grow LED 200W UFO, send Hunter Hydro the details of your growing area and current lighting.

Review the supplied installation instructions before mounting the light. Calculate delivery by entering your suburb and postcode in the cart, then review the order total before checkout.

Browse our LED grow lights, contact Hunter Hydro or consult the manufacturer or distributor information for this range.

When supplementary lighting makes sense

Pro Grow’s lighting guidance identifies the 100W and 200W UFO sizes for supplementary or under-canopy use. For this 200W model, start by identifying which part of an existing growing area needs additional light. Its round fixture shape differs from a long bar, so plan the position around the plants and access space rather than treating both formats as interchangeable.

Rated-power running cost example

One 200W fixture uses 0.2 kWh for every hour at its rated input. A 12-hour day is 2.4 kWh, a 16-hour day is 3.2 kWh and an 18-hour day is 3.6 kWh. Multiply by the number of fixtures and your electricity tariff to estimate the lighting portion of running costs. These calculations do not include fans or other equipment and are not a measurement of an individual installation.

Measuring supplementary light

The listed photon-output figure describes the light emitted by the fixture. PPFD describes light arriving per square metre at a point on the canopy. The units and measurements are different. Do not substitute total fixture output for a canopy reading when planning daily light exposure.

When adding the UFO to an existing light, assess the combined arrangement at several plant positions. Check access for watering and avoid placing the fixture where foliage or equipment prevents adequate air movement. Use the mounting guidance for the supplied unit rather than a fixed distance copied from another wattage.