ULight 1000w GROW LIGHT Full Spectrum LED
$2,000.00
ULight 1000W full-spectrum ten-bar grow light with 5040 diodes and selectable 25%, 50% and 75% dimming settings for vegetative and flowering use.
Description
ULight 1000W full-spectrum LED grow light
The ULight 1000W is a ten-bar LED grow light for vegetative and flowering use. Its full-spectrum array contains 5040 diodes, with selectable 25%, 50% and 75% dimming settings. The ten-bar format spreads the light sources across the fixture rather than concentrating them in one central lamp.
ULight 1000W features
| Rated power | 1000W |
|---|---|
| Layout | Ten LED bars |
| Spectrum | Full spectrum |
| Diode count | 5040 |
| Listed dimming selections | 25%, 50% and 75% |
| Intended stages | Vegetative growth and flowering |
Using the dimming settings
The listed settings let you adjust light output as part of the growing setup. Choose the setting and mounting position for the plants and the instructions supplied with the fixture. A dimmer percentage should not be treated as a measured electrical draw or a measured canopy PPFD value.
When changing output, assess the whole canopy rather than only the plants directly under the centre. The layout, hanging height and plant height affect how light is distributed. Check the supplied controls and connections before adding an external controller; compatibility is not established simply because another product has a similar connector.
Planning rated-power electricity use
The 1000W rating equals 1 kilowatt. At rated input, a 12-hour lighting day uses 12 kWh per fixture, while an 18-hour day uses 18 kWh. Multiply by the number of fixtures and your electricity tariff to estimate lighting cost. Actual dimmed consumption should be measured if you need an installation-specific figure.
Before installing a ten-bar fixture
Check the overhead space, suspension points and access around the plants. Allow room to adjust the light as the canopy develops. Plan cable routing so the lead is supported without strain and connections are kept clear of irrigation.
Use the mounting instructions for the unit supplied and keep access for inspecting its connections. Disconnect power before cleaning or changing suspension hardware. The 5040-diode count describes the LED array; it does not by itself specify the light intensity received by a particular leaf.
Choosing the ULight 1000W
Compare the ten-bar layout, full-spectrum use and controls with the requirements of your growing space. If you are replacing a smaller fixture, provide Hunter Hydro with the canopy footprint and your current lighting details so the options can be compared in context.
Browse our LED grow lights, contact Hunter Hydro or consult the official supplier’s ULight 1000W information.
Additional information
| Weight | 16 kg |
|---|---|
| Dimensions | 119 × 115 × 71.5 cm |
