INTROGRO 26W LED GROW BAR

Description

IntroGro 26W LED Grow Bar

IntroGro 26W LED Grow Bar is a slim 26W LED bar with a 6500K grow spectrum. The all-in-one, linkable design suits propagation and vegetative lighting arrangements where a compact bar is more practical than a large overhead fixture.

IntroGro 26W LED Grow Bar specifications

Choose the Grow version

IntroGro offers separate Grow and Bloom bars. This listing is the Grow version, with a 6500K spectrum. Select the spectrum for the job you are planning rather than treating the two versions as interchangeable. Check the product label and the original image before buying additional bars for an existing setup.

Flexible bar placement

The narrow format lets you position the light along a shelf or above a compact group of plants. Arrange the mounting points so the bar is secure and the lead can be routed without strain. Leave access for watering, inspecting plants and adjusting the growing area.

Linking multiple bars

Compatible IntroGro bars can be linked using the appropriate connection equipment. The distributor specifies a maximum combined load of 500W per circuit. Work out the total connected load and follow the product instructions; do not assume every cable or other-brand bar can be linked to this model. Confirm any additional lead requirements before ordering.

How much electricity does a 26W bar use?

At its stated 26W rating, one bar uses 0.026 kilowatt-hours for each hour it runs. For example, a 16-hour day is 0.416 kWh, and an 18-hour day is 0.468 kWh per bar. Multiply that figure by the number of bars and your electricity tariff to estimate lighting cost. These are calculations from the rated power, not measured consumption for your installation. Choose the lighting schedule for the plants you are growing.

How do I plan the linked load?

Add the rated wattage of every bar on the same linked circuit. As a calculation example, nineteen 26W bars total 494W, while twenty total 520W and exceed the distributor’s 500W limit. This calculation is a load check, not permission to assemble a particular number of fixtures. Use only the matching connection equipment, and follow any lower limit in the supplied instructions or on a component label.

What should I check before extending an existing setup?

Confirm that your existing bars are the linkable IntroGro type and compare their connectors before ordering a linking lead. The 2 metre power lead is for supplying the light; it does not establish that a separate linking lead is included. Hanging hooks and clips are listed with the bar. Plan the distance between fixtures and power points so that a cable is not stretched between them.

Choosing your IntroGro 26W LED Grow Bar

Check the model name and the specifications above before ordering. Match the fixture to the space available, the stage of growth and the equipment you already use. If you need help comparing the IntroGro 26W LED Grow Bar, send Hunter Hydro the details of your growing area and current lighting.

Review the supplied installation instructions before mounting the light. Calculate delivery by entering your suburb and postcode in the cart, then review the order total before checkout.

Browse our LED grow lights, contact Hunter Hydro or consult the manufacturer or distributor information for this range.